Change to system in operation, shuttle signal/2-phase
Click the menu button in the top left corner.
Click on Devices & System.
Click on the system you want to change.
A map view of the system opens. For overall changes in the system click on the SETTINGS button in the upper right corner. The System Information window opens. Here you can adjust previously entered information, control all red, switch devices on/off and delete the system.
All red
By turning on all red, all devices will be locked in all red. To release all red, turn off the toggle here or click in the large banner that appears inside the system,
Devices on/off
Use this toggle to turn off/on all devices at once.
When changes are made press SAVE.
The settings for each phase are shown in the respective phase box.
Activate inactive system, shuttle signal/2-phase
Click the menu button in the top left corner.
Click on System & Devices.
Click on the system you want to activate.
A map view of the system opens. Change the slider in the upper right corner to active and click SAVE.
Remove a system, shuttle signal/2-phase
Click the menu button in the top left corner.
Click on Devices & System.
Click on the arrow to the right of the system you want to change.
A map view of the system opens. Click SETTINGS in the upper right corner, then scroll down to the bottom of the dialog and click DELETE.
Click OK to confirm deleting the system.